Return To Buds HO Cars Store




Fast Fingers Slot Car Club
at Bud’s H.O. Cars
2011 Fall / Winter
Race Schedule


09/09/111/32 Stock Scalextric / Pioneer / Revell / Monogram Race
Any Scalextric, Pioneer, Revell, or Monogram 1/32nd scale fendered car
No F1 cars allowed
The body must be factory box stock
You may not remove any interiors or windshields for this race, you may either glue or remove the wings, mirrors or other fragile pieces if you wish
You may repaint or add any decorative modifications to the car
No altering the body to enhance it’s strength or speed
You may use magnets of choice this includes either adding them or removing them.
You may remove lights, reversing switches, circuit boards, and wire directly to your motor if you wish
You may use silicone tires if you wish
The motor must be the stock motor that came with the car (no exceptions or modifications to these motors)
Must have stock pinion gear and stock crown or spur gear
Must have stock front and rear rims and axles
Race will be run at 14 Volts
Cars may be teched.



                

10/07/11Bud's Race of Champions
Out-of-the-box stock race
Car will be purchased at race time $20 per racer you keep the car, everyone will have the same car, and will use house controllers.
Car will be turned over to you at practice.  Body is not to be removed unless there is an issue with the car.
You may bring a bottle of oil, a manual braid brush (no Dremels), tire cleaner of your choice, and a wiper for tire cleaning.  No braid dressing (Voodoo Juice), no tire dressing, grip, or traction compound.  No pit boxes, either leave them in your vehicle or place in impound.
Race will be run at 12 volts.


10/14/111/32 Stock Carrera Race
Any Carrera 1/32nd scale fendered car
No F1 or KTM X-bow cars allowed
The body must be factory box stock
You may not remove any interiors or windshields for this race, you may either glue or remove the wings, mirrors or other fragile pieces if you wish
You may repaint or add any decorative modifications to the car
No altering the body to enhance it’s strength or speed
You may use magnets of choice this includes either adding them or removing them.
You may remove lights, reversing switches, circuit boards, and wire directly to your motor if you wish
You may use silicone tires if you wish
The motor must be a stock Carrera E-200 or E-500 motor (no
exceptions or modifications to these motors)
Must have Carrera stock plastic pinion gear and plastic crown gear
Must have stock front and rear rims and axles
Race will be run at 14 Volts
Cars may be teched.   Your cars must come in on or under 20,000 RPM’s. While cars are opened they are also subject to be checked for the stock gears, etc


10/21/111/32 Open Modifed
Any 1/32nd scale, hard bodied (no lexan), plastic chassis (no metal) car
Must race with body on the car.
You may remove interiors, windshields, mirrors, wings, etc.  for this race
If the car is a hardtop, must have the top on
Anything else goes
Race will be run at 12 Volts



11/04/111/32 Stock Carrera Race
Any Carrera 1/32nd scale fendered car
No F1 or KTM X-bow cars allowed
The body must be factory box stock
You may not remove any interiors or windshields for this race, you may either glue or remove the wings, mirrors or other fragile pieces if you wish
You may repaint or add any decorative modifications to the car
No altering the body to enhance it’s strength or speed
You may use magnets of choice this includes either adding them or removing them.
You may remove lights, reversing switches, circuit boards, and wire directly to your motor if you wish
You may use silicone tires if you wish
The motor must be a stock Carrera E-200 or E-500 motor (no
exceptions or modifications to these motors)
Must have Carrera stock plastic pinion gear and plastic crown gear
Must have stock front and rear rims and axles
Race will be run at 14 Volts
Cars may be teched.   Your cars must come in on or under 20,000 RPM’s. While cars are opened they are also subject to be checked for the stock gears, etc



11/18/111/24 Stock Carrera Race
Any Carrera 1/24 scale car
The body must be factory box stock
You may not remove any interiors or windshields for this race, you may either glue or remove the wings, mirrors or other fragile pieces if you wish
You may repaint or add any decorative modifications to the car
No altering the body to enhance it’s strength or speed
You may use magnets of choice this includes either adding them or removing them.
Lights must be functional
You may wire directly to your motor if you wish
You may use silicone tires if you wish
The motor must be a stock Carrera motor (no exceptions or modifications to these motors)
Must have Carrera stock pinion gear and spur gear
Must have stock front and rear rims and axles
Race will be run at 18 Volts
Cars may be teched.  




12/02/111/32 Stock Carrera Race
Any Carrera 1/32nd scale fendered car
No F1 or KTM X-bow cars allowed
The body must be factory box stock
You may not remove any interiors or windshields for this race, you may either glue or remove the wings, mirrors or other fragile pieces if you wish
You may repaint or add any decorative modifications to the car
No altering the body to enhance it’s strength or speed
You may use magnets of choice this includes either adding them or removing them.
You may remove lights, reversing switches, circuit boards, and wire directly to your motor if you wish
You may use silicone tires if you wish
The motor must be a stock Carrera E-200 or E-500 motor (no
exceptions or modifications to these motors)
Must have Carrera stock plastic pinion gear and plastic crown gear
Must have stock front and rear rims and axles
Race will be run at 14 Volts
Cars may be teched.   Your cars must come in on or under 20,000 RPM’s. While cars are opened they are also subject to be checked for the stock gears, etc



12/16/111/32 Stock Race, Any brand
Any 1/32nd scale, hard bodied (no lexan), plastic chassis (no metal) car.  No cars with Boxer, long can, FK-180 motors.  This would include Slot.it Boxer, Ninco long cans, and NSR Kings.
The body must be factory box stock
You may not remove any interiors or windshields for this race, you may either glue or remove the wings, mirrors or other fragile pieces if you wish
You may repaint or add any decorative modifications to the car
No altering the body to enhance it’s strength or speed
Magnet usage:  you may use all the manufacturer provided magnet bays.  No gluing additional magnets to the top or bottom of the chassis.  No stacking magnets.  However, the magnet(s) you use does not have to be the original magnet(s).
You may remove lights, reversing switches, circuit boards, and wire directly to your motor if you wish
You may use silicone tires if you wish
The motor must be stock (no exceptions or modifications to these motors)
Must have stock pinion gear and stock crown or spur gear
Must have stock front and rear rims and axles
Race will be run at 12 Volts
Cars may be teched.    While cars are opened they are also subject to be checked for the stock gears, hidden magnets, etc.



Return To Buds HO Cars Store